کنترلر TNC 640 heidenhain و iTNC 530

	TNC 640	iTNC 530
Axes	Up to 18 axes and 2 spindles	Up to 18 axes and 2 spindles
Interpolation	s Linear in max. 5 axes (with Tool Center Point Management) s Circular in max. 3 axes with tilted working plane s Spline interpolation in max. 5 axes s Helix sCylinder surface1) s Rigid tapping1)	s Linear in max. 5 axes (with Tool Center Point Management) s Circular in max. 3 axes with tilted working plane s Spline interpolation in max. 5 axes s Helix sCylinder surface1) s Rigid tapping1)
Programming	HEIDENHAIN conversational, DIN/ISO	HEIDENHAIN conversational, smarT.NC, DIN/ISO
Programming support	TNCguide presents user information directly on the control	TNCguide presents user information directly on the control
DXF converter option	Download contours and machining positions from DXF files	Download contours and machining positions from DXF files
Program memory	Hard disk with at least 21 GB	Hard disk with at least 21 GB
Position entry	Nominal positions in Cartesian or polar coordinates, dimensions absolute or incremental, in mm or inches; actual position capture	Nominal positions in Cartesian or polar coordinates, dimensions absolute or incremental, in mm or inches; actual position capture
Input resolution and display step	As fine as 0.1 μm or 0.000 1°; TNC 640optionally as fine as 0.01 μm or 0.000 01°	As fine as 0.1 μm or 0.000 1°; TNC 640optionally as fine as 0.01 μm or 0.000 01°
Block processing time	0.5 ms (3-D straight line without radius compensation at 100 % PLC utilization)	0.5 ms (3-D straight line without radius compensation at 100 % PLC utilization)
Turning functions option	s Turning tool data management s Tool-tip radius compensation s Constant surface speed sToggling between milling and turning operations	-

 

 

High speed cutting	Motion control with minimum jerk	Motion control with minimum jerk
FK free contour programming	HEIDENHAIN conversational with graphical support	HEIDENHAIN conversational with graphical support
Fixed cycles	For drilling, milling and turning (only TNC 640, option); data input with graphical support	For drilling, milling and turning (only TNC 640, option); data input with graphical support
Touch probe cycles	For tool measurement, workpiece alignment, workpiece measurement and workpiece presetting	For tool measurement, workpiece alignment, workpiece measurement and workpiece presetting
Graphics	For programming and program verification	For programming and program verification
Parallel operation	Program run and programming with graphics	Program run and programming with graphics
Data interface	Ethernet 1000BASE-T; USB 2.0; RS-232-C/V.24 (max. 115 200 baud)	Ethernet 1000BASE-T; USB 2.0; RS-232-C/V.24 (max. 115 200 baud)
Remote control and diagnosis	TeleService	TeleService
Visual display unit	15-inch or 19-inch color flat-panel display (TFT)	15-inch or 19-inch color flat-panel display (TFT)
Axis feedback control	s Feedforward control or operation with following error s Integrated digital drive control with integrated inverter	s Feedforward control or operation with following error s Integrated digital drive control with integrated inverter
Adaptive feed rate control option	AFC adjusts the contouring feed rate to the spindle power1)	AFC adjusts the contouring feed rate to the spindle power1)
DCM collision monitoring option	Dynamic monitoring of the working space for possible collisions with machine components1)	Dynamic monitoring of the working space for possible collisions with machine components1)
Coordinate transformation	s Datum shift, rotation, mirror image, scaling factor (axis-specific) s Tilting the working plane, PLANE function (option)	s Datum shift, rotation, mirror image, scaling factor (axis-specific) s Tilting the working plane, PLANE function (option)

Accessories

s Electronic handwheel s TS workpiece touch probe and TT or TL tool touch probe

s Electronic handwheel s TS workpiece touch probe and TT or TL tool touch probe